Auto Water Pump Installation

Hot Flash!. Instant Hot Water Systems Explained and 5 Brands Compared

Residential hot water circulating systems provide the user with fast hot water providing a convenience for the user, and saving the water that would have been run down the drain.

Traditional hot water circulating systems form a loop with the hot water piping that connects from the water heater outlet to the fixtures, and then back to the water heater. A pump circulates the hot water through the loop. These systems provide nearly instant hot water at each fixture, but they are very expensive to operate. They waste huge amounts of energy keeping hot water in the pipe, and decrease the life of the water heater. They are inappropriate for tankless water heaters. Traditional circulating systems are made by Grundfos, Taco, Bell & Gusset, and others.

Laing makes a system suitable for retro-fitting to existing homes that don’t have a dedicated return line, called the Auto Circ. It is a small pump that mounts under the sink, and pumps water from the hot water pipe into the cold water pipe, and when hot water reaches 95 degrees, the pump shuts off. When the temperature drops to 85 degrees the pump turns back on and the cycle repeats. The pump can handle several fixtures if the plumbing layout is correct. This system uses a lot of energy since it keeps the plumbing full of above ambient temperature water, and the cold water line ends up with tepid water not cold. The Laing autocirc is not suitable for use with a tankless water heater.

Grundfos makes a similar hot water circulating system for retrofitting into homes that don’t have a dedicated hot water return line. A pump connects to the outlet of the water heater, and a thermally controlled valve is placed at each fixture in the home. The valves are connected between the hot and cold water lines. When each valve is cold water can flow from the hot line to the cold, and does so because the pump at the water heater outlet is providing pressure. When hot water reaches the valve, the valve closes. This keeps hot water near all the fixtures in the home with just one pump. However, like the Laing Autocirc, it doesn’t really deliver hot water, just luke warm, and it replaces the cold water with tepid. The system is not suitable for use with a tankless water heater.

Metlund and Chilipepper make “demand” hot water systems. Demand hot water systems are residential hot water circulating systems designed to work without a dedicated return, and are suitable for retrofit to existing homes. They also use the cold water piping for a return line. The demand pumps, like the Laing pump, are placed under a fixture where they connect the hot and cold water lines. When the pump is activated by the user pushing a button, it pumps water out of the hot water pipe and into the cold water pipe, and shuts off when the hot water reaches the pump. Demand system pumps are more powerful than the other types of systems to move the water quickly.

The demand system has several advantages over the traditional system, and saves the same amount of water. One large advantage is the reduction in energy usage. Since the demand system only runs for a few seconds whenever someone demands hot water, it uses very little energy for pumping…typically less than $2.00 a year. It stops running when hot water reaches the fixture, and so it doesn’t use any more hot water than what you would normally use without a circulating system. Another advantage is the much smaller installation cost. It’s easy and economical to retrofit to any house.

Demand systems have more powerful pumps than the other systems and so the Chilipepper pump and at least one of the larger Metlund pumps will work with tankless water heaters. Most of the circulating pumps won’t pump enough water to activate the tankless heaters.

About the Author

William Lund has been an inventor for over 35 years, and has over a dozen patents. His website deals with water heaters both storage and tankless, and hot water circulating systems. Water Heaters and Demand Systems And Mr. Lund invites you to visit his blog:Pondering Everything

How To Install Replace Water Pump Chevy GMC Silverado Sierra Tahoe Yukon 4.8L 5.3L 6.0L 99-04 1AAuto

Keurig Water Filter Replacement Starter Kit $11.00 Filter your water for an even better tasting cup of coffee, tea, hot cocoa or iced beverage by using The Water Filter Starter Kit accessory. Simply assemble and insert in your water reservoir. Two water filters and instructions are included. For use exclusively with the following Keurig brewers purchased after August 2007: Elite, Classic, Ultra, Special Edition, Ultimate, Select and Platinum….

Honeywell Econoswitch RPLS740B 7-Day Solar Time Table Programmable Switch for Lights and Motors $35.89 The Honeywell RPLS740B 7-Day Solar Time Table Programmable Switch for Lights and Motors helps you save money by ensuring that your lights come on only when you need them. This unit works with incandescent, halogen, and fluorescent lighting, making it ideal for indoor or outdoor use. It also works with ceiling fans, bathroom fans, pond pumps, and pool pumps. Featuring three operating modes and sev…

Honeywell RTH7600D Touchscreen 7-Day Programmable Thermostat $75.17 Keep your home comfortable and cash in on energy savings with the RTH7600D seven-day programmable touchscreen thermostat from Honeywell (formerly packaged as model number RTH7600B). Designed for easy use and quick installation and packed with convenient features, this thermostat gives you programmable, customizable control over your home’s temperature without having to make constant manual adjustm…

Whynter 14,000 BTU Dual Hose Portable Air Conditioner (ARC-14S) $431.49 Whynter is going GREEN! With this new Eco-friendly CFC free, lead free and high enery efficiency portable air conditioner, you can stay cool while keeping with better environmental standards and reducing energy consumption. This Whynter GREEN ARC-14S portable air conditioner features the ECO-FRIENDLY CFC free GREEN R-410A refrigerant and lead free RoHS compliant components. This unit features…

Lux TX9000TS Touch Screen Seven-Day Programmable Thermostat $49.00 Efficient. Easy. Economical. That’s why you’ll love the Lux TX9000TS seven-day programmable thermostat. This clever device gives you complete and accurate temperature control at the touch of a finger. Compatible with a variety of heating and cooling systems, this thermostat incorporates do-it-yourself installation, a responsive touch screen, and a large lighted display for straightforward programm…

Honeywell RTH7500D Conventional 7-Day Programmable Thermostat $59.75 Keep your home comfortable and cash in on energy savings with the RTH7500D 7-Day Programmable Thermostat from Honeywell. Designed for quick installation and offering simple push-button controls and an easy-to-read screen, this thermostat lets you control the temperature of your home without having to make constant manual adjustments….

Intex Krystal Clear Wall-Mounted Pool Surface Skimmer $12.00 Intex Krystal Clear Wall-Mounted Pool Surface Skimmer works in conjunction with your Intex pool’s filter pump. Helps catch leaves and other surface debris before it sink to the pool’s floor. Strainer basket pulls out for easy cleaning with a garden hose. This skimmer does not require filter cartridge replacements. This deluxe automatic pool skimmer includes a hose as well as an adjustable mounting…

Camco 40055 Brass Water Pressure Regulator $5.95 Brass, Water Pressure Regulator, Keeps Water Pressure At A Safe, Consistent 40-50 LB Of Operational Pressure, Compliant With New Low Lead Requirements….

SHURflo 2088-422-444 2.8 Classic Series Potable Water Pump $64.95 Get SHURflo’s best pump in DC or AC models… reliable pumping anywhere! Here are two great options in freshwater pumps. Both are high-quality made by Shurflo for years of dependable service. Run dry without damage; Built-in check valve prevents backflow up to 200 PSI; Dry primes to 12 feet; Automatic demand feature for water when you want it; 12-volt DC or 115-volt AC. Order ONLINE Today! AVAILAB…

SHURflo 182-200 Pre-Pressurized Accumulator Tank $42.94 SHURflo Accumulator Tank protects your pump from premature burnout. Who doesn’t want to protect their investments? This 24-oz. Accumulator tank extends pump life due to less switch cycling and motor heat. Reduces noise levels of pump cycles and water hammer too. May be used with any water pump, alone or in multiples; Pre-pressurized to 20 PSI at factory… water flow remains smooth and constant; S…

Thetford Easyfit Heads Pump Installation Kit, 12v $199.99 Thetford Easyfit Heads Pump Installation Kit, 12v . This head gives you all the features and conveniences of Tecma s Silence and Silence Plus models in an ultra-compact design with a smaller footprint and inclined back for installation in the pre-molded head compartments on many boats. Select either a Pump Kit or a Solenoid Kit to complete the installation of your EasyFit Head. The Solenoid Installation Kit enables plumbing directly to your boat s pressurized water system for freshwater flushing. The Pump Installation Kit enables flushing with raw water (seawater) drawn from outside the boat. Type: Electric Features: Small footprint with inclined back; Automatic programmable flush cycle with lockout electronics to prevent flushing when tank is full; Programmable water fill Material: Vitreous china Draw: 30A 12V DC Port Sizes: With solenoid: 1/2″ inlet, 1-1/2″ discharge; With pump: 3/4″ inlet; 1-1/2″ discharge Included Equipment: Head includes holding tank sensor and wall-mounted progra

Waeco Adler Barbour Coldmachine Water Cooling Installation Kit $499.99 Waeco Adler Barbour Coldmachine Water Cooling Installation Kit . Simplify water-cooling installation for your CU-200 Super ColdMachine Compressor. Kit includes 12V DC water pump and mounting bracket, switch, 5′ of 5/8″ hose and 10′ of 3/8″ hose, hose clamps, a seawater strainer, 5/8″ plastic thru-hull discharge fitting, wiring diagram and mounting screws. Pump draws less than 1A and must be plumbed to a seawater source for operation. Supplemental Installation Guide for New Quick-Connect Couplings.

Johnson Pump Gray Water Tank $244.99 Johnson Pump Gray Water Tank . Designed for use as a waste water collection tank for showers and sinks, this tank comes with Johnson s water sensing, sealed, electronic Ultima Switch. Tank may be used with any wastewater pump with capacity up 20A. Inlet ports are 3/4″, 1″ and 1 1/2″. Outlet ports are 3/4″ and 1″. Tank comes prepared for optional installation of Viking 16 pump, Model 11006962. Tank measures 13-3/8″L x 11″W x 7-5/16″H. One-year warranty.

Eheim Compact Aquarium Water Pump Model 300 $18.99 Eheim Compact Aquarium Water Pump Model The Eheim Compact Aquarium Water Pump Model is a small but versatile pump. The pump is fully submersible & easy to conceal. For use underwater and keeping/rearing tanks where reliable water conveyance circulation flow is required. The pump offers an adjustable flow rate between 40-80gph and comes with suction holders to stick on the tank (fits in small places). Features: . Adjustable capacity . Priming screen protects the pump and aquarium inhabitants from damage . Easily attached by the included suction holders . Extremely quiet Low power consumption . Fully submersible and easy to conceal . The pump can be easily fixed on panes with the included suction holders Item Specifications: Size: Models: 300, 600, 1000 Model Pump Output Max Head Hose Size Dimensions (LxWxH) Weight Eheim Compact 300 80gph 1.6ft 1/2″ 2.0″ x 1.4″ x 2.2″ 0.6lb Eheim Compact 600 160gph 4.3ft 1/2″ 2.5″ x 1.8″ x 3.3″ 1.0lb Eheim Compact 1000 265gph 6.6ft 5/8″ 3.0″ x 2.1″ x 3.7″ 1.5lb Caution: . Follow the installation instructions issued by the protein skimmer manufacturer . Diffuser is not included with the unit . Check all pipes and hose connections for leaks Installation: . Fit the two fastening strips underneath the motor body and attach all four suction feet . Place the pump in the desired position and press it lightly to secure it . The four suction feet also serve as vibration dampers . The pump can be used in or out of the water . The pump does not automatically take in water, therefore it must be placed below the level of the water surface if used out of water . Plumb the Eheim Compact+ Marine Pump to the protein skimmer . Start Up: . Plug in the electrical plug to start the pump Turn the Control Knob from “min.” (-) to “max.” (+) to adjust the flow rate as required

Johnson Pump Viking Power 16 Bilge/gray Water Pump $224.99 Johnson Pump Viking Power 16 Bilge/gray Water . Well suited for gray water or bilge pumpouts this pump features non-choke valves which eliminate the need for an in-line strainer. The pump has built-in thermal protection, can be run dry and can handle a mixture of air and water without difficulty. Installation is facilitated by ports that can be rotated to suit spacial requirements. The nitrile diaphragm is oil and fuel resistant with maintenance made easy by the housing which permits replacement without a need to remove the pump. gpm: 4 Self-Prime: 9.8′ Material: Nylon, glass-fiber reinforced body; Nitrile rubber valves; Reinforced nitrile rubber diaphragm Port Sizes: KlickTite XL connectors for 1″ or 3/4″ hose & 1/2″ BSP threads Dimensions: 7.3″L x 9.3″/7.1″W x 4.6″/8″H (Width and height depend on configuration) Volts: 12V Draw: 4A

Taam Rio Hyperflow Water Pump 8HF $36.99 Taam Rio Hyperflow Water Pump The Taam Rio Hyperflow Water Pump is reliable, and is known to offer great, long-lasting performance. The pump is very easy installation, and offers a vortex rotor blade, a rare-earth magnet, and offers a high flow rate. Good water circulation is critical to maintaining a healthy environment in your tank. The Rio HyperFlow pump is compact, higly effective, and offers high performances. This product pumps more gallons per watt than any same-size external pump. Features: Powerful, efficient, and compact Ceramic shaft with bearing Low heat emission Fully submersible, Energy-efficient design Great resistance to corrosion High-impact plastic construction Wet/dry filtration

Taam Rio Hyperflow Water Pump 12HF $53.99 Taam Rio Hyperflow Water Pump The Taam Rio Hyperflow Water Pump is reliable, and is known to offer great, long-lasting performance. The pump is very easy installation, and offers a vortex rotor blade, a rare-earth magnet, and offers a high flow rate. Good water circulation is critical to maintaining a healthy environment in your tank. The Rio HyperFlow pump is compact, higly effective, and offers high performances. This product pumps more gallons per watt than any same-size external pump. Features: Powerful, efficient, and compact Ceramic shaft with bearing Low heat emission Fully submersible, Energy-efficient design Great resistance to corrosion High-impact plastic construction Wet/dry filtration

Taam Rio Hyperflow Water Pump 17HF $74.99 Taam Rio Hyperflow Water Pump The Taam Rio Hyperflow Water Pump is reliable, and is known to offer great, long-lasting performance. The pump is very easy installation, and offers a vortex rotor blade, a rare-earth magnet, and offers a high flow rate. Good water circulation is critical to maintaining a healthy environment in your tank. The Rio HyperFlow pump is compact, higly effective, and offers high performances. This product pumps more gallons per watt than any same-size external pump. Features: Powerful, efficient, and compact Ceramic shaft with bearing Low heat emission Fully submersible, Energy-efficient design Great resistance to corrosion High-impact plastic construction Wet/dry filtration

Taam Rio Hyperflow Water Pump 20HF $79.99 Taam Rio Hyperflow Water Pump The Taam Rio Hyperflow Water Pump is reliable, and is known to offer great, long-lasting performance. The pump is very easy installation, and offers a vortex rotor blade, a rare-earth magnet, and offers a high flow rate. Good water circulation is critical to maintaining a healthy environment in your tank. The Rio HyperFlow pump is compact, higly effective, and offers high performances. This product pumps more gallons per watt than any same-size external pump. Features: Powerful, efficient, and compact Ceramic shaft with bearing Low heat emission Fully submersible, Energy-efficient design Great resistance to corrosion High-impact plastic construction Wet/dry filtration

Taam Rio Hyperflow Water Pump 26HF $109.99 Taam Rio Hyperflow Water Pump The Taam Rio Hyperflow Water Pump is reliable, and is known to offer great, long-lasting performance. The pump is very easy installation, and offers a vortex rotor blade, a rare-earth magnet, and offers a high flow rate. Good water circulation is critical to maintaining a healthy environment in your tank. The Rio HyperFlow pump is compact, higly effective, and offers high performances. This product pumps more gallons per watt than any same-size external pump. Features: Powerful, efficient, and compact Ceramic shaft with bearing Low heat emission Fully submersible, Energy-efficient design Great resistance to corrosion High-impact plastic construction Wet/dry filtration

Taam Rio Hyperflow Water Pump 32HF $114.99 Taam Rio Hyperflow Water Pump The Taam Rio Hyperflow Water Pump is reliable, and is known to offer great, long-lasting performance. The pump is very easy installation, and offers a vortex rotor blade, a rare-earth magnet, and offers a high flow rate. Good water circulation is critical to maintaining a healthy environment in your tank. The Rio HyperFlow pump is compact, higly effective, and offers high performances. This product pumps more gallons per watt than any same-size external pump. Features: Powerful, efficient, and compact Ceramic shaft with bearing Low heat emission Fully submersible, Energy-efficient design Great resistance to corrosion High-impact plastic construction Wet/dry filtration

Sierra Water Pump Gasket $4.49 Sierra Water Pump Gasket . Sierra water pump gasket

Sierra Water Pump Kit $74.99 Sierra Water Pump Kit . Replaces: Johnson Pump 09-45825

Sierra Water Pump Housing Kit $46.99 Sierra Water Pump Housing Kit . Complete water pump housing kit

Whale Pumps Ic Auto Super Sub Pump, 12v Bilge $99.99 Whale Pumps Ic Auto Super Sub Pump, 12v Bilge . With a low-profile design and horizontal or vertical discharge positions, these versatile pumps are a great choice for narrow/low clearance bilges where others just won t fit. The strainer is designed to leave a minimum water level of just 3/8″. Twist-lock assembly/disassembly makes them easy to clean. Super Sub 650 and 1100gph pumps feature a non-fouling, built-in electronic switch with no moving parts. Pump Type: Centrifugal Submersible: Yes Power Requirements: 12V DC Port Diameter: 3/4″ Case Material: Polypropylene Warranty: One year

Thetford Easyfit Heads Solenoid Installation Kit, 12v $39.99 Thetford Easyfit Heads Solenoid Installation Kit, 12v . This head gives you all the features and conveniences of Tecma s Silence and Silence Plus models in an ultra-compact design with a smaller footprint and inclined back for installation in the pre-molded head compartments on many boats. Select either a Pump Kit or a Solenoid Kit to complete the installation of your EasyFit Head. The Solenoid Installation Kit enables plumbing directly to your boat s pressurized water system for freshwater flushing. The Pump Installation Kit enables flushing with raw water (seawater) drawn from outside the boat. Type: Electric Features: Small footprint with inclined back; Automatic programmable flush cycle with lockout electronics to prevent flushing when tank is full; Programmable water fill Material: Vitreous china Draw: 30A 12V DC Port Sizes: With solenoid: 1/2″ inlet, 1-1/2″ discharge; With pump: 3/4″ inlet; 1-1/2″ discharge Included Equipment: Head includes holding tank sensor and wall-mounted pr

Sierra Water Pump Impeller $13.99 Sierra Water Pump Impeller . .438″ Impeller Merc/Mariner

Jabsco Smooth Flow Water Pump Controller, 31777 0000 $132.99 Jabsco Smooth Flow Water Pump Controller, 31777 0000 . Provides smooth quiet water flow without pulsation Converts Conventional Water System Pumps to Variable Speed Drive. Variable Speed Drive (VSD) converts everyday pumps into sensor-controlled pumps that automatically adjust in real time to changes in pressure. As more or less flow is required the pump adjusts the voltage to your existing pump motor providing smooth and pulsation-free water flow. Adjusts for multiple fixtures Eliminates temperature variation Eliminates need for space consuming accumulator tank Works with most multi-chamber diaphragm water pressure pumps Easy-to-install Simple in-line installation Runs on 12 or 24 VDC input Not compatible with Flojet 4405 and Jabsco 31295½ 31395 series pumps

Rule Industries Pwc Bilge Pump Installation Kit $4.33 Rule Industries Pwc Bilge Pump Installation Kit . Includes 2′ of discharge hose, a thru-hull fitting, hole saw, hose clamps, a fuse and fuseholder, and a small tube of sealant.

Aqualarm Bilge Pump Alarm $69.99 Aqualarm Bilge Pump . Activates loud alarm and bright red light when excessive pumping occurs due to high water. Features include alarm, red light, auto/off/man switch, green on light and fuse holder. Use with Aqualarm Smart Bilge Pump Switch 2 1/2″x3 1/2″

Mercury Marine Water Pump Assembly $132.99 Mercury Marine Water Pump Assembly . For GM small block water circulating pump

Sierra Mercury Water Pump Impeller $14.49 Sierra Mercury Water Pump Impeller . Water pump impeller for Mercury engines replaces OEM #47-42038Q02

Jabsco Shower Drain Pump $239.99 Jabsco Shower Drain Pump . Easy-install pump drains shower water fast This 3.7gpm, self-priming waste pump features run-dry capability and a head that rotates to any of three positions with ports that rotate a full 360 to make installation easy. The dependable diaphragm design easily handles the demands of shower drain installations. gpm: 3.7 Self-Prime: 6′ Material: Nylon Port Sizes: 3/4″ Dimensions: 6.25″W x 11.57″L x 5.19″H Draw: 7A12V DC

Thetford Easyfit High With 12v Solenoid, Bone Low Water Pump, White $812.88 Thetford Easyfit High With 12v Solenoid, Bone Low Water Pump, White . This head gives you all the features and conveniences of Tecma s Silence and SilencePlus models in an ultra-compact design featuring a smaller footprint and inclined back for installation in the pre-molded head compartments on many boats. Solenoid models (without pump) plumb directly to boat s pressurized freshwater system. Models with pump draw seawater from outside the boat. Type: Electric Features: Small footprint with inclined back; automatic programmable flush cycle with lockout electronics to prevent flushing when tank is full; programmable water fill Material: Vitreous china Draw: 30A 12V DC Port Sizes: With solenoid: 1/2″ inlet, 1-1/2″ discharge; with pump: 3/4″ inlet 1-1/2″ discharge Dimensions: High: 17.4″H x 14.3″W x 18.7″D; low: 14.3″H x 14.3″W x 18.7″D Included Equipment: Toilet, holding tank sensor, wall-mounted programmer/control Color: White Warranty: Two years

Thetford Easyfit High With 12v Solenoid, Bone Water Pump, White $812.88 Thetford Easyfit High With 12v Solenoid, Bone Water Pump, White . This head gives you all the features and conveniences of Tecma s Silence and SilencePlus models in an ultra-compact design featuring a smaller footprint and inclined back for installation in the pre-molded head compartments on many boats. Solenoid models (without pump) plumb directly to boat s pressurized freshwater system. Models with pump draw seawater from outside the boat. Type: Electric Features: Small footprint with inclined back; automatic programmable flush cycle with lockout electronics to prevent flushing when tank is full; programmable water fill Material: Vitreous china Draw: 30A 12V DC Port Sizes: With solenoid: 1/2″ inlet, 1-1/2″ discharge; with pump: 3/4″ inlet 1-1/2″ discharge Dimensions: High: 17.4″H x 14.3″W x 18.7″D; low: 14.3″H x 14.3″W x 18.7″D Included Equipment: Toilet, holding tank sensor, wall-mounted programmer/control Color: White Warranty: Two years

Sierra Merc Water Pump Kits $41.99 Sierra Merc Water Pump Kits . Replacement for Mercury/Mariner Outboard #46-42579A4

Hydor USA Koralia Wave Control Water Pump 4WAY $514.99 Hydor USA Koralia Wave Control Water Pump The Hydor USA Koralia Wave Control Water Pump helps enhance water movement for custom aquarium systems. The energy-efficient pump design offers low power consumption, and the innovative wave-making system harnesses the power of Koralia submersible pumps. These water circulation pumps give you great flexibility and control of a wave maker. Features: . Accepts up to two or four low-voltage Koralia Controllable Pumps of any model . Expands custom options for outstanding water movement in aquariums of all sizes . Timer-controllable . Adjustable flow rate fine-tunes water movement . Optional Night mode with photo sensor . Unique Patented Magnet + Suction Cup Support . Easy to use and safe . Adjustable flow direction . Low Voltage Safety Item Specifications: Size: 2way, 4way Caution: . Before operating the Koralia Controllable Pump, please verify that all components are undamaged, especially the cord . Before any kind of maintenance or intervention, always disconnect electrical supply of any appliance placed in the water . Make sure to position the Koralia Wave maker Pump Controller in a safe and dry place . It should be protected from accidental water splashes, humidity, moisture, and calcium/salt deposits in order to prevent any accidental electrical shock Installation: . Position the desired number of Hydor Koralia Controllable Pumps in the aquarium . Make sure the Koralia Controllable Pumps are completely underwater to prevent potential harm to aquarium inhabitants or splashing water . Apply the Anti-Electromagnetic Interference Magnet on the pump cords . Apply the Anti-Slip Supports on the bottom of the Koralia Wave maker Controller . Connect the pumps to the Koralia Wave maker Controller, making sure that the connectors are inserted properly in the slot and the terminals click into place . Connect the Koralia Wave maker Controller to the power supply . Turn on the Koralia Wave maker Controller by bringing the On/Off switch to the “I” position . Moments after the Koralia Wave maker Controller is turned on, the controller will carry out standard systems check (approximately 15 seconds) to make sure that all components are ready . All LEDs will light up and pumps will start at the “Alternate Flow” mode . Set the Koralia Wave maker Controller to better suit the needs of the aquarium by turning the Pulse/Flow/Timer knob and the “minimum” and “maximum” flow power knobs . Make sure the “minimum” and maximum” are never set equal . The “maximum” power should always be more than the “minimum” power setting Maintenance: The Koralia Wave maker does not require any particular maintenance procedure, but it is advisable to clean the unit and the area around it from dust and any other debris to prevent any potential malfunctions

Hydor USA Koralia Wave Control Water Pump 2WAY $336.99 Hydor USA Koralia Wave Control Water Pump The Hydor USA Koralia Wave Control Water Pump helps enhance water movement for custom aquarium systems. The energy-efficient pump design offers low power consumption, and the innovative wave-making system harnesses the power of Koralia submersible pumps. These water circulation pumps give you great flexibility and control of a wave maker. Features: . Accepts up to two or four low-voltage Koralia Controllable Pumps of any model . Expands custom options for outstanding water movement in aquariums of all sizes . Timer-controllable . Adjustable flow rate fine-tunes water movement . Optional Night mode with photo sensor . Unique Patented Magnet + Suction Cup Support . Easy to use and safe . Adjustable flow direction . Low Voltage Safety Item Specifications: Size: 2way, 4way Caution: . Before operating the Koralia Controllable Pump, please verify that all components are undamaged, especially the cord . Before any kind of maintenance or intervention, always disconnect electrical supply of any appliance placed in the water . Make sure to position the Koralia Wave maker Pump Controller in a safe and dry place . It should be protected from accidental water splashes, humidity, moisture, and calcium/salt deposits in order to prevent any accidental electrical shock Installation: . Position the desired number of Hydor Koralia Controllable Pumps in the aquarium . Make sure the Koralia Controllable Pumps are completely underwater to prevent potential harm to aquarium inhabitants or splashing water . Apply the Anti-Electromagnetic Interference Magnet on the pump cords . Apply the Anti-Slip Supports on the bottom of the Koralia Wave maker Controller . Connect the pumps to the Koralia Wave maker Controller, making sure that the connectors are inserted properly in the slot and the terminals click into place . Connect the Koralia Wave maker Controller to the power supply . Turn on the Koralia Wave maker Controller by bringing the On/Off switch to the “I” position . Moments after the Koralia Wave maker Controller is turned on, the controller will carry out standard systems check (approximately 15 seconds) to make sure that all components are ready . All LEDs will light up and pumps will start at the “Alternate Flow” mode . Set the Koralia Wave maker Controller to better suit the needs of the aquarium by turning the Pulse/Flow/Timer knob and the “minimum” and “maximum” flow power knobs . Make sure the “minimum” and maximum” are never set equal . The “maximum” power should always be more than the “minimum” power setting Maintenance: The Koralia Wave maker does not require any particular maintenance procedure, but it is advisable to clean the unit and the area around it from dust and any other debris to prevent any potential malfunctions

Johnson Pump Low Boy Bilge Pump $42.99 Johnson Pump Low Boy Bilge . Great for limited clearance installations such as under an inboard engine, this manually-operated pump offers 750gph capacity with a convenient, easy to clean, removable cartridge design. Pump includes removable check valve plus one straight and one 90 smooth elbow Dura-Port for easy hand installation and the elimination of stress cracks caused by over tightened clamps. Separate float-style or electronic water sensing switch required for automatic operation. Type: Centrifugal cartridge bilge pump Port: 3/4″ Draw: 3A Fuse: 5A Dimensions: 2.82″H x 3.2″W x 5.75″L Built-In Switch: No Material: Thermo-plastic body, 316 stainless-steel shaft Warranty: Three years

Sierra Raw Water Pump $259.99 Sierra Raw Water Pump . Crank shaft mounted Replaces: Johnson: 10-24228-1Indmar: 685011PleasureCraft: RA057023Volvo Penta: 841640-6Fits: 431A, 500A/B, 501A, 570A, 571A, AQ180, AQ200, AQ200B/C/D/F, AQ250A, AQ211A, AQ225, AQ231A/B, AQ260, AQ255B, AQ260A, AQ271A/B/C/D/, AQ280A, AQ290A

Sierra Water Pump Repair Kits $54.99 Sierra Water Pump Repair Kits . All the parts you need to do the job right. Components are manufactured from premium materials to stringent quality standards. Kits contain: water tube impeller housing water pump gasket grommet drain gasket water pump base to gear housing gasket water pump gasket seal ring plate and O-rings

Supreme Hy-Drive Water Pump 1900GPH $164.99 Supreme Hy-Drive Water Pump 1900GPH

Supreme Hy-Drive Water Pump 2550GPH $204.99 Supreme Hy-Drive Water Pump 2550GPH

Supreme Hy-Drive Water Pump 6150GPH $299.99 Supreme Hy-Drive Water Pump 6150GPH

Supreme Hy-Drive Water Pump 6600GPH $329.99 Supreme Hy-Drive Water Pump 6600GPH