Autocad Blocks Cars Free Download


How to get Autodesk AutoCAD LT 2012 free and save 922$ :S


Harken Mid Range Cars, Parts And Accessories Replqacement Torlon Balls (25)


Harken Mid Range Cars, Parts And Accessories Replqacement Torlon Balls (25)


$18.96


Harken Mid Range Cars, Parts And Accessories Replqacement Torlon Balls (25) . Midrange traveler end controls allow installation of traveler purchase from 2:1 to 4:1, fastening directly to the track without extra holes in the deck. End control sheaves are free-running 40mm Carbo Blocks, so your traveler will release easily in a gust.

Lewmar 105mm Synchro Blocks Single


Lewmar 105mm Synchro Blocks Single


$421.01


Lewmar 105mm Synchro Blocks Single . Synchro blocks combine geometry, sheave ratios and a unique Free Spin bearing, to deliver performance that s comparable to ball and roller bearing blocks used in pro racing at a more affordable price. With conventional blocks, one of the biggest losses in efficiency comes from the distortion of line as it wraps around the sheave. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. The result is larger sheaves with a smaller axle than exist on conventional blocks. To help ensure that the benefits of design translate into improved performance, optimal line sizes are marked on sheaves. Synchro blocks improve efficiency by nearly 5% on a single block at a load of 442lb. (200kg). Calculated over a typical six-block mainsheet system, this approaches a 40% improvement over conventional blocks. This range of blocks transforms performance, not only by improving efficiency, but also speed and

Harken Micro Captive Ball Traveler Cars, Track And Parts With Control Blocks, 3 7/16 Length, 310lb. Swl


Harken Micro Captive Ball Traveler Cars, Track And Parts With Control Blocks, 3 7/16 Length, 310lb. Swl


$121.57


Harken Micro Captive Ball Traveler Cars, Track And Parts With Control Blocks, 3 7/16″ Length, 310lb. Swl . Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Or flex the guides to pop out the balls and snap them back without removing the guide. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Jib sheet cars. Vangs on small dinghies. Controls on small keelboats Boat Size: Dinghies, multihulls, small keelboats Features: Captive ball bearings in stainless guides. Ball Bearings: Torlon Track Dimensions: 2707: 1/2″W x 3/8″H (13mm x 9mm) or 2709: 1/2″W x 13/16″H (13mm x 20mm) Fasteners: #8 FHMS

Harken Mid Range Cars, Parts And Accessories Stand Up Toggle, 2 5/16 Length, 2500lb. Swl


Harken Mid Range Cars, Parts And Accessories Stand Up Toggle, 2 5/16 Length, 2500lb. Swl


$57.99


Harken Mid Range Cars, Parts And Accessories Stand Up Toggle, 2 5/16″ Length, 2500lb. Swl . Midrange traveler end controls allow installation of traveler purchase from 2:1 to 4:1, fastening directly to the track without extra holes in the deck. End control sheaves are free-running 40mm Carbo Blocks, so your traveler will release easily in a gust.

Harken Micro Captive Ball Traveler Cars, Track And Parts Control Blocks (pair), 1 5/6 Length, 3/4 Height Above


Harken Micro Captive Ball Traveler Cars, Track And Parts Control Blocks (pair), 1 5/6 Length, 3/4 Height Above


$33.92


Harken Micro Captive Ball Traveler Cars, Track And Parts Control Blocks (pair), 1 5/6″ Length, 3/4″ Height Above . Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Or flex the guides to pop out the balls and snap them back without removing the guide. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Jib sheet cars. Vangs on small dinghies. Controls on small keelboats Boat Size: Dinghies, multihulls, small keelboats Features: Captive ball bearings in stainless guides. Ball Bearings: Torlon Track Dimensions: 2707: 1/2″W x 3/8″H (13mm x 9mm) or 2709: 1/2″W x 13/16″H (13mm x 20mm) Fasteners: #8 FHMS

Harken Micro Captive Ball Traveler Cars, Track And Parts Lite (use With 29mm Or 40mm Carbo Blocks), 3/16 Length, 310lb. Swl


Harken Micro Captive Ball Traveler Cars, Track And Parts Lite (use With 29mm Or 40mm Carbo Blocks), 3/16 Length, 310lb. Swl


$82.37


Harken Micro Captive Ball Traveler Cars, Track And Parts Lite (use With 29mm Or 40mm Carbo Blocks), 3/16″ Length, 310lb. Swl . Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Or flex the guides to pop out the balls and snap them back without removing the guide. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Jib sheet cars. Vangs on small dinghies. Controls on small keelboats Boat Size: Dinghies, multihulls, small keelboats Features: Captive ball bearings in stainless guides. Ball Bearings: Torlon Track Dimensions: 2707: 1/2″W x 3/8″H (13mm x 9mm) or 2709: 1/2″W x 13/16″H (13mm x 20mm) Fasteners: #8 FHMS

Harken 22mm Micro Blocks Block, Single, 200lb. Swl, 0.5oz.


Harken 22mm Micro Blocks Block, Single, 200lb. Swl, 0.5oz.


$8.94


Harken 22mm Micro Blocks Block, Single, 200lb. Swl, 0.5oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Single With Swivel, 200lb. Swl, 1.0oz.


Harken 22mm Micro Blocks Block, Single With Swivel, 200lb. Swl, 1.0oz.


$17.9


Harken 22mm Micro Blocks Block, Single With Swivel, 200lb. Swl, 1.0oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Triple With Becket, 500lb. Swl, 2.3oz.


Harken 22mm Micro Blocks Block, Triple With Becket, 500lb. Swl, 2.3oz.


$32.94


Harken 22mm Micro Blocks Block, Triple With Becket, 500lb. Swl, 2.3oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Single With Becket, 200lb. Swl, 0.75oz.


Harken 22mm Micro Blocks Block, Single With Becket, 200lb. Swl, 0.75oz.


$10.29


Harken 22mm Micro Blocks Block, Single With Becket, 200lb. Swl, 0.75oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Forkhead, 200lb. Swl, 1.0oz.


Harken 22mm Micro Blocks Block, Forkhead, 200lb. Swl, 1.0oz.


$12.27


Harken 22mm Micro Blocks Block, Forkhead, 200lb. Swl, 1.0oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Single With Shackle, 200lb. Swl, 0.75oz.


Harken 22mm Micro Blocks Block, Single With Shackle, 200lb. Swl, 0.75oz.


$12.9


Harken 22mm Micro Blocks Block, Single With Shackle, 200lb. Swl, 0.75oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Double With Becket, 350lb. Swl, 1.5oz.


Harken 22mm Micro Blocks Block, Double With Becket, 350lb. Swl, 1.5oz.


$24.27


Harken 22mm Micro Blocks Block, Double With Becket, 350lb. Swl, 1.5oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Triple, 500lb. Swl, 2.0oz.


Harken 22mm Micro Blocks Block, Triple, 500lb. Swl, 2.0oz.


$32.19


Harken 22mm Micro Blocks Block, Triple, 500lb. Swl, 2.0oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Double, 350lb. Swl, 1.5oz.


Harken 22mm Micro Blocks Block, Double, 350lb. Swl, 1.5oz.


$22.49


Harken 22mm Micro Blocks Block, Double, 350lb. Swl, 1.5oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Cheek, 200lb. Swl, 0.75oz.


Harken 22mm Micro Blocks Block, Cheek, 200lb. Swl, 0.75oz.


$12.15


Harken 22mm Micro Blocks Block, Cheek, 200lb. Swl, 0.75oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Upright Lead, 200lb. Swl, 1.0oz.


Harken 22mm Micro Blocks Block, Upright Lead, 200lb. Swl, 1.0oz.


$12.47


Harken 22mm Micro Blocks Block, Upright Lead, 200lb. Swl, 1.0oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Lewmar 40mm Control Blocks Block, Single, 528lb. Swl, 1.8oz.


Lewmar 40mm Control Blocks Block, Single, 528lb. Swl, 1.8oz.


$23.18


Lewmar 40mm Control Blocks Block, Single, 528lb. Swl, 1.8oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Lewmar 40mm Control Blocks Block, Double With Becket, 1,056lb. Swl, 4.0oz.


Lewmar 40mm Control Blocks Block, Double With Becket, 1,056lb. Swl, 4.0oz.


$50.21


Lewmar 40mm Control Blocks Block, Double With Becket, 1,056lb. Swl, 4.0oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Lewmar 40mm Control Blocks Block, Cheek, 528lb. Swl, 1.5oz.


Lewmar 40mm Control Blocks Block, Cheek, 528lb. Swl, 1.5oz.


$20.09


Lewmar 40mm Control Blocks Block, Cheek, 528lb. Swl, 1.5oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Lewmar 40mm Control Blocks Block, Triple, 1,584lb. Swl, 6.6oz.


Lewmar 40mm Control Blocks Block, Triple, 1,584lb. Swl, 6.6oz.


$71.07


Lewmar 40mm Control Blocks Block, Triple, 1,584lb. Swl, 6.6oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Lewmar 40mm Control Blocks Block, Double, 1,056lb. Swl, 4.0oz.


Lewmar 40mm Control Blocks Block, Double, 1,056lb. Swl, 4.0oz.


$47.12


Lewmar 40mm Control Blocks Block, Double, 1,056lb. Swl, 4.0oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Lewmar 40mm Control Blocks Block, Triple With Becket, 1,584lb. Swl, 6.8oz.


Lewmar 40mm Control Blocks Block, Triple With Becket, 1,584lb. Swl, 6.8oz.


$74.16


Lewmar 40mm Control Blocks Block, Triple With Becket, 1,584lb. Swl, 6.8oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Lewmar 40mm Control Blocks Block, Single With Becket, 528lb. Swl, 2.0oz.


Lewmar 40mm Control Blocks Block, Single With Becket, 528lb. Swl, 2.0oz.


$26.27


Lewmar 40mm Control Blocks Block, Single With Becket, 528lb. Swl, 2.0oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Lewmar 40mm Control Blocks Block, Triple With Cam, 1,584lb. Swl, 8.7oz.


Lewmar 40mm Control Blocks Block, Triple With Cam, 1,584lb. Swl, 8.7oz.


$101.2


Lewmar 40mm Control Blocks Block, Triple With Cam, 1,584lb. Swl, 8.7oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Rhythm Band Sand Blocks Sand Blocks


Rhythm Band Sand Blocks Sand Blocks


$3.99


Rhythm Band Sand Blocks Sand Blocks

Harken Small Boat Windward Sheeting Traveler Cars Adapter Kit


Harken Small Boat Windward Sheeting Traveler Cars Adapter Kit


$286.09


Harken Small Boat Windward Sheeting Traveler Cars Adapter Kit . A patented slider mechanism allows cars to be pulled to windward without releasing the leeward control line. Windward sheeting cars stay in place during tacks. Makes racing short-handed a lot more fun. Indicated use is based upon monohulls with end-boom travelers. Track Type: Small Boat CB Track: 2720, 2721, 373, 374, 2725, 2751 Block Type: Uses 2740 Control Blocks Ball Bearings: SB: Delrin; HL/1250: Torlon Cleat Type: Modified 150 Cam-Matic Shackle: Pivoting shackle Cam: Leeward cleat opens automatically Purchase: 2:1/3:1 Line Diameter: 5/16″ max. (8mm)

Debt Free Cars Get Better Gas Mileage Car Bumper Sticker by CafePress


Debt Free Cars Get Better Gas Mileage Car Bumper Sticker by CafePress


$5


Are you no longer dragging that car payment around? or did you never go into debt in the first place? We all know it, now show it. Debt free cars get better gas mileage Car Bumper Sticker Tell the world how you feel Our bumper stickers are perfect for expressing yourself while cruising down the highway or just for posting on the wall. Measures 10 x 3. Printed on 4mil vinyl using water and UV resistant inks -

Lewmar 60mm Racing Fiddle Blocks With Becket & Ratchet, 882lb. Swl, 8.0oz.


Lewmar 60mm Racing Fiddle Blocks With Becket & Ratchet, 882lb. Swl, 8.0oz.


$92.7


Lewmar 60mm Racing Fiddle Blocks With Becket & Ratchet, 882lb. Swl, 8.0oz. . For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy Ball Bearings: Delrin Sheave Size: 2-3/8″ (60mm) & 1-5/8″ (40mm) Line Dia.: 3/8″ max. Cheek Material/Finish: Anodized aluminum alloy Shackle/Strap Type: Swivel with three-way locking, drilled-out head Cleat: Model with cleat: adjustable arm, aluminum cam cleat Ratchet: Model with ratchet: aluminum ratchet, recessed lever

Lewmar 60mm Racing Fiddle Blocks Block, 882lb. Swl, 6.1oz.


Lewmar 60mm Racing Fiddle Blocks Block, 882lb. Swl, 6.1oz.


$67.21


Lewmar 60mm Racing Fiddle Blocks Block, 882lb. Swl, 6.1oz. . For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy Ball Bearings: Delrin Sheave Size: 2-3/8″ (60mm) & 1-5/8″ (40mm) Line Dia.: 3/8″ max. Cheek Material/Finish: Anodized aluminum alloy Shackle/Strap Type: Swivel with three-way locking, drilled-out head Cleat: Model with cleat: adjustable arm, aluminum cam cleat Ratchet: Model with ratchet: aluminum ratchet, recessed lever

Lewmar 60mm Racing Fiddle Blocks With Becket & Cleat, 882lb. Swl, 12.4oz.


Lewmar 60mm Racing Fiddle Blocks With Becket & Cleat, 882lb. Swl, 12.4oz.


$156.05


Lewmar 60mm Racing Fiddle Blocks With Becket & Cleat, 882lb. Swl, 12.4oz. . For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy Ball Bearings: Delrin Sheave Size: 2-3/8″ (60mm) & 1-5/8″ (40mm) Line Dia.: 3/8″ max. Cheek Material/Finish: Anodized aluminum alloy Shackle/Strap Type: Swivel with three-way locking, drilled-out head Cleat: Model with cleat: adjustable arm, aluminum cam cleat Ratchet: Model with ratchet: aluminum ratchet, recessed lever

Rhythm Band Temple Blocks


Rhythm Band Temple Blocks


$209.99


Rhythm Band Temple Blocks

Trophy Wood Blocks Large


Trophy Wood Blocks Large


$15.95


Trophy Wood Blocks Large

Harken Captive Ball Bearing Spinnaker Pole Cars Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. Swl


Harken Captive Ball Bearing Spinnaker Pole Cars Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. Swl


$279.36


Harken Captive Ball Bearing Spinnaker Pole Cars Car, Track #2720, 900sq.ft. Max. Sail Area, 1125lb. Swl . Now with captive ball bearings, which eliminates the need for a ball-bearing loader during installation or removal from track. These cars run freely, fit low-beam traveler track and are easy to adjust under any load. Include ring fitting and control block shackles (order control blocks separately).

Harken 22mm Micro Blocks Block, Traveler (two 224s), 200lb. Swl, 1.3oz.


Harken 22mm Micro Blocks Block, Traveler (two 224s), 200lb. Swl, 1.3oz.


$20.03


Harken 22mm Micro Blocks Block, Traveler (two 224s), 200lb. Swl, 1.3oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Single With Shackle & Becket, 200lb. Swl, 1.0oz.


Harken 22mm Micro Blocks Block, Single With Shackle & Becket, 200lb. Swl, 1.0oz.


$14.33


Harken 22mm Micro Blocks Block, Single With Shackle & Becket, 200lb. Swl, 1.0oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Thru Deck (5/8 X 9/16 Cutout), 200lb. Swl, 1.0oz.


Harken 22mm Micro Blocks Block, Thru Deck (5/8 X 9/16 Cutout), 200lb. Swl, 1.0oz.


$21.5


Harken 22mm Micro Blocks Block, Thru Deck (5/8″ X 9/16″ Cutout), 200lb. Swl, 1.0oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Triple With Becket & 423 Cam, 500lb. Swl, 3.5oz.


Harken 22mm Micro Blocks Block, Triple With Becket & 423 Cam, 500lb. Swl, 3.5oz.


$71.79


Harken 22mm Micro Blocks Block, Triple With Becket & 423 Cam, 500lb. Swl, 3.5oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Block/eye Strap Assembly, 200lb. Swl, 0.56oz.


Harken 22mm Micro Blocks Block, Block/eye Strap Assembly, 200lb. Swl, 0.56oz.


$12.73


Harken 22mm Micro Blocks Block, Block/eye Strap Assembly, 200lb. Swl, 0.56oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Fiddle With V Jam Cleat, 350lb. Swl, 2.0oz.


Harken 22mm Micro Blocks Block, Fiddle With V Jam Cleat, 350lb. Swl, 2.0oz.


$26.29


Harken 22mm Micro Blocks Block, Fiddle With V Jam Cleat, 350lb. Swl, 2.0oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Harken 22mm Micro Blocks Block, Fiddle With V Jam Cleat & Becket, 350lb. Swl, 2.0oz.


Harken 22mm Micro Blocks Block, Fiddle With V Jam Cleat & Becket, 350lb. Swl, 2.0oz.


$28.62


Harken 22mm Micro Blocks Block, Fiddle With V Jam Cleat & Becket, 350lb. Swl, 2.0oz. . Extremely lightweight, free running blocks. Designed for any number of uses on dinghies and for lightly loaded control lines on boats of all sizes (inside masts and booms, lead car returns, tackle, etc.). Where applicable, blocks use #10 fasteners. Sheave: Delrin Ball Bearings: Delrin Sheave Size 7/8″ (22mm) Maximum Line Diameter: 1/4″ (6mm) Cheek Material/Finish: Polished 316 stainless Shackle/Strap Type: Fixed loop, loop with shackle Cleat: V-jam-244, 245; Carbo-Cam 231 Breaking Load: 1200lb.

Softube Bass Amp Room Plug-in - Native Download Digital Download


Softube Bass Amp Room Plug-in – Native Download Digital Download


$179.99


Softube’s Bass Amp Room plug-in was designed to handle all your bass amp needs, from dirty rock to modern clean, keeping two equally important goals in mind. The first was to give the user the best possible sound quality. The latter was to create an intuitive plug-in which allows for a really fast workflow. Time is money, but cutting down on time shouldn’t mean you have to accept poor results.Bass Amp Room consists of a model of a classic bass amplifier, three distinctive speaker cabinets with click-and-drag mics, and a blendable DI section with tone controls and a limiter. That’s it. And it’s all you need to create a unique signature sound – the strength lies in the ease of use of the individual blocks and the huge range of sounds these can produce when combined.In short, Bass Amp Room is all about getting a sound you know you can trust, and getting it quickly, from a plug-in you don’t need a degree in computer science to handle.Authenic Amp ModelingAlthough being designed as a guitar amp, this 70s amp has proven to be an excellent choice for bass players. A thick and solid preamp distortion without any fizz lets you crank it up without losing the low end.AmplifierThe power amp has a more traditional power amp distortion (controlled by the Master Volume knob), but at extreme settings it will start to sound more broken.The High/Low switch wasn’t a part of the original amp, but was added to give you a cleaner and fatter sound when necessary.CabinetsThe ClassicIndustry standard 8×10″ for fat rock solid bass tones with lots of low end and lots of definition.The RockerFor rock sounds, a 4×12″ is the given choice. Focused, hard and sounds just as it should.The Odd BirdAn open back 1×12″ isn’t exactly the most usual choice for a bass player, but in a studio it works just excellent!D.I. and Mix PanelSeparate D.I. ControlsThe D.I. is separate from the amp and cabs, and allows you to tailor the direct signal separately from the amped signal, just like in real life. The tone controls are specially designed for bass and are extremely fast to work with.D.I. LimiterThe one knob limiter tames the transients in the direct bassBlend Amp and D.I. The possibility to blend the D.I. signal with the amp signal allows you to get a huge range of sounds. For instance, set the amp on a really distorted signal, and blend in some low end from the D.I.NOTE: This software requires a Pace iLok USB key (“dongle”) which can hold over 500 cross-platform software authorizations all manageable via iLok’s website. You can authorize software programs, plug-ins, features, and modules even those published by multiple developers without the burden of multiple

Lewmar 40mm Control Blocks Block, Single Stand Up, 528lb. Swl, 1.9oz.


Lewmar 40mm Control Blocks Block, Single Stand Up, 528lb. Swl, 1.9oz.


$25.49


Lewmar 40mm Control Blocks Block, Single Stand Up, 528lb. Swl, 1.9oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Lewmar 40mm Control Blocks Block, Single Fixed Strap, 528lb. Swl, 1.6oz.


Lewmar 40mm Control Blocks Block, Single Fixed Strap, 528lb. Swl, 1.6oz.


$20.09


Lewmar 40mm Control Blocks Block, Single Fixed Strap, 528lb. Swl, 1.6oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Lewmar 40mm Control Blocks Block, Single Vertical Lead 880lb. Swl, 2.4oz.


Lewmar 40mm Control Blocks Block, Single Vertical Lead 880lb. Swl, 2.4oz.


$24.72


Lewmar 40mm Control Blocks Block, Single Vertical Lead 880lb. Swl, 2.4oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Lewmar 40mm Control Blocks Block, Single With Becket & Cam, 528lb. Swl, 2.0oz.


Lewmar 40mm Control Blocks Block, Single With Becket & Cam, 528lb. Swl, 2.0oz.


$66.44


Lewmar 40mm Control Blocks Block, Single With Becket & Cam, 528lb. Swl, 2.0oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Lewmar 40mm Control Blocks Block, Triple With Becket & Cam, 528lb. Swl, 8.9oz.


Lewmar 40mm Control Blocks Block, Triple With Becket & Cam, 528lb. Swl, 8.9oz.


$104.29


Lewmar 40mm Control Blocks Block, Triple With Becket & Cam, 528lb. Swl, 8.9oz. . Performs like pro racing blocks at a fraction of the price Through a combination of geometry, advanced materials and a unique Free Spin bearing, Lewmar created a block that performs as well as pro racing blocks at a fraction of the cost. Molded MRT sheaves and composite cheeks reduce weight and roll resistance and improve impact resilience. Design versatility also makes the Synchro Control 40 suitable for everything from control blocks on superyachts to dinghies. Sheave: Composite reinforced plastic Sheave Size: 1 9/16″ (40mm) Ball Bearings: Stainless steel Line Size: 3/8″ max. Cheek Material/Finish: Composite reinforced plastic Shackle/Strap Type: Stainless Steel

Harken Carbo Furling Lead Block Assemblies Kit (includes All Three Blocks)


Harken Carbo Furling Lead Block Assemblies Kit (includes All Three Blocks)


$201.02


Harken Carbo Furling Lead Block Assemblies Kit (includes All Three Blocks) . These stanchion lead blocks have free-rolling ball bearings to lead line aft for safe furling from the cockpit. Use the 7401 40mm block on the bow pulpit as an inboard lead. The 7402 features a ratchet to control spooling when unfurling. The 7401 and 7402 have ball and socket bases to align blocks for smooth leads aft. The 7403 has a 29mm sheave and allows the furling line to travel outboard of the stanchion to keep the side deck clear. Mounts to stanchion with a four-screw clamp. Material: UV-stabilized glass-fiber, nylon resin side plates Maximum Line Length: 3/8″ (10mm)

Harken Small Boat Windward Sheeting Traveler Cars Hi Load Car, 125 To 160sq. Ft. Mainsail Size


Harken Small Boat Windward Sheeting Traveler Cars Hi Load Car, 125 To 160sq. Ft. Mainsail Size


$396.48


Harken Small Boat Windward Sheeting Traveler Cars Hi Load Car, 125 To 160sq. Ft. Mainsail Size . A patented slider mechanism allows cars to be pulled to windward without releasing the leeward control line. Windward sheeting cars stay in place during tacks. Makes racing short-handed a lot more fun. Indicated use is based upon monohulls with end-boom travelers. Track Type: Small Boat CB Track: 2720, 2721, 373, 374, 2725, 2751 Block Type: Uses 2740 Control Blocks Ball Bearings: SB: Delrin; HL/1250: Torlon Cleat Type: Modified 150 Cam-Matic Shackle: Pivoting shackle Cam: Leeward cleat opens automatically Purchase: 2:1/3:1 Line Diameter: 5/16″ max. (8mm)

Harken Small Boat Windward Sheeting Traveler Cars Car, 125sq. Ft. Mainsail Size


Harken Small Boat Windward Sheeting Traveler Cars Car, 125sq. Ft. Mainsail Size


$371.71


Harken Small Boat Windward Sheeting Traveler Cars Car, 125sq. Ft. Mainsail Size . A patented slider mechanism allows cars to be pulled to windward without releasing the leeward control line. Windward sheeting cars stay in place during tacks. Makes racing short-handed a lot more fun. Indicated use is based upon monohulls with end-boom travelers. Track Type: Small Boat CB Track: 2720, 2721, 373, 374, 2725, 2751 Block Type: Uses 2740 Control Blocks Ball Bearings: SB: Delrin; HL/1250: Torlon Cleat Type: Modified 150 Cam-Matic Shackle: Pivoting shackle Cam: Leeward cleat opens automatically Purchase: 2:1/3:1 Line Diameter: 5/16″ max. (8mm)


You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.